COMPANY PRODUCT

1. Simple Introduction
The carbon black content tester is suitable for the determination of carbon black content in polyethylene, polypropylene, polybutene plastics, cable and optical cable insulation and sheath materials, and rubber. Comply with national standards GBT 3515-2005, GBT 13021-1991, GB∕T2951.41-2008, IEC60811-4-1: 2004. A certain amount of sample is pyrolyzed at high temperature in a nitrogen stream, and the carbon black content is obtained by analyzing the weight of the sample after pyrolysis.

2. Main Characteristics
Exclusive use of digital gas flow meter control and automatic gas switching in China
Original dual temperature probe design, higher temperature accuracy (TH-9002)
7-inch microcomputer touch screen control, full automation, easy operation
No need to supervise the experiment process
The experiment is over, the buzzer reminds
The diameter of the glue outlet can reach 12mm, no need to worry about blockage
220mm heating zone, can measure three samples at the same time
Quartz tube can be taken out to speed up cooling and reduce waiting time
 
3. Technical Parameters

temperature range	Room Temperature～1100℃	Temperature fluctuation	±0.2℃
Heating rate	0.1～40℃/min	Temperature resolution	0.01℃
gas pressure	0.2MPa	Temperature control method	Full automatic control
Gas flow	0～300mL/min OR 0～2000mL/min	Atmosphere control	Gas mass flow meter
Display method	24bit color, 7-inch touch screen	Heating zone	Length 220mm
Quartz tube	Length 440mm, inner diameter 32mm	Quartz Boat	Length 50mm or 75mm
Dimensions (w*d*h)	42*37*40cm	net weight	25KG
Packing size (w*d*h)	Wooden box 61*50*52	Gross weight	41KG